The PD and PDB series pail pumps are capable of delivering a wide range of materials directly from 5 gallon pails. From low viscosity / light bodied to high viscosity / heavy bodied materials, there is a PD or PDB model available that can pump these materials over a wide range of flow rates and […]
Double Post Elevator Pail Pumps Read More »
The DT and BH Series pumps are capable of pumping low to medium viscosity “level-seeking” fluids such as glues, paint, ink, lubricants, etc., from open top or closed top 55 gallon drums. Choose a model from the following 2 series of pumps to suit your material and pumping requirements. DT Series: Drum top pump with
Drum Top and Bung Hole Drum Pumps Read More »
The GF Series pumps are capable of pumping virtually any low to medium viscosity material that can be gravity fed. They can also be used as booster pumps where materials must be pumped over very long distances. These floor flange mounted pumps have 3” NPT inlets and 1 1/4” NPT outlets that make them well
Gravity Feed Pumps Read More »
Designed for use in high production / high usage applications, these drum pumps can deliver low viscosity / light bodied to high viscosity / heavy bodied materials over a wide range of flow rates and fluid pressures. Drum low level detection with pump stop is standard. Each pump is a complete package ready for use.
Double Post Elevator Drum Pumps Read More »
Download our PDF The The Jesco Model N-5130 Series Bench Top Dispenser is a small, compact, two component dispenser for metering, mixing and dispensing non-corrosive, non-abrasive, level seeking materials, including epoxies, acrylics, urethanes and polysulphides. Perfect for use in labs, mold shops and prototype development. N-5130 KEY FEATURES Small benchtop design. Dispenser requires only 12”x
N-5130 Series Bench Top Dispenser Read More »
Jesco has a complete and extensive line of Applicator Valves designed to dispense virtually any single or multi-component material of low to high viscosity, over a wide range of flow rates and pressures. Jesco has Applicator Valves that can uniquely suit the requirements of your application, whether the application requires: Extruding, pouring, streaming or spraying
The Jesco N-210 and N-211 Series Hand Crank Dispensers are designed to deliver batches of 2 component materials at a predetermined ratio into a mixing cup for hand mixing. These dispensers are ideal for plastic tool or mold shops or material manufacturer’s labs or any other application where production rates are low or mixture work life is short and does not warrant automatic meter, mix and dispense equipment.
N-210 and N-211 Series Hand Crank Dispensers Read More »
Download our PDF Have a low material usage, manual apply dispensing application that still requires good bead size consistency or shot size control? Can’t justify the cost of a full blown metering system for your application? Contact Jesco and ask about the Model 300 and 400 Series tube dispensers. The Jesco Tube Dispensers are low
Model 300 & 400 Series Tube Dispensers Read More »
The Jesco N-2990 Series Electric Drive Double Acting dispensers were designed to dispense small amounts of low to moderately high viscosity materials. A Stepper Motor Driven Linear Actuator is used to drive 2 Lance type Positive Piston Displacement Meters. The meters are arranged in an opposed fashion such that when one meter is Dispensing, the
N-2990 Series Double Acting One Component Dispensers Read More »
Download our PDF N-1740 Series Ram Conventional Viscosity Piston Meter Dispensers The Jesco Ram Meter Series dispensers are constant flow rate, positive displacement dispensers that can meter low to high viscosity adhesives and sealers directly from the material supply container. They can dispense precisely metered shots or consistent diameter beads at an adjustable and repeatable
N-1740 Series 5 Gallon One Component Ram Meter Dispensers Read More »
